Use a Multipurpose Spray

Are you looking forward to saving time? Bring a multipurpose spray bottle to your home. However, the liquid will be prepared in your kitchen. All you need is a half cup of vinegar and a half cup of water. On the other hand, if you’re repulsed by the smell of vinegar, you can infuse essential oils into the blend. Most people use lemon as it has a lucrative smell. The most amazing thing about this spray is that it can be used on almost any surface in your home, such as your countertops, the interior shutters in your windows, and kitchen cabinets. Leaving you with a cleaner home without using any strong chemicals. 

Use Olive Oil

It is not only good for your health but has plenty of other benefits too. Many experts acknowledge it as furniture polish because it is the perfect antioxidant. The use of olive oil will surely simplify your life and allow you to live sustainably. Use a cotton cloth and drench it in olive oil. Once the cloth has absorbed enough quantity, you must squeeze it. Don’t forget to add lemon juice, as it will cut the strong smell of olive oil. Use the blend to polish your furniture, and once done, let every piece of furniture out in the naked sun.

Fight Mould with Vinegar and Tea tree Oil

No wonder mold is a major problem in major households right now. However, one spray infused with vinegar, and tea tree oil is enough to fight this problem. All you have to do is prepare the home spray and rub it on the affected parts. Once done, allow the liquid to rest on the surface for 30 minutes. On the contrary, if you’re not an avid DIYer, it is recommended to consult professional home cleaners. Make sure to learn about their net reputation before hiring.

Use Bicarbonate Soda

Bicarbonate soda works in 3 ways broadly: it emanates a sweet smell, fizzes if wet, and will penetrate grease without much effort. Bicarbonate soda is a major necessity in households because it assists in bathroom cleaning to a great extent. On the other hand, it helps remove grease from the infected areas of the bathroom. Secondly, if you wish to see the sanitary parts of the bathroom shine, bicarbonate soda will enable you to breathe life into this goal. Once the bicarbonate soda is used, it will help in giving out a fresh look at the surface.

Use the Castile Soap

Most experts swear by this biodegradable and non-toxic soap. It is usually used as dish soap, for laundry detergent, and the floor cleaner. Recently, experts have also recommended it for use as a shampoo. To create it, you need to wash up the liquid, mix some part of the castile soap with a little amount of water.

For best results, it is recommended that you use a quarter cup of vinegar and don’t forget to put hot water in it. Squeeze the castile soap so that the mixture can benefit from it the most. 

The post Top Ways to Clean your Home Naturally appeared first on InstantELLA.

9 Tips for Removing Scratches from Wood Floors

There’s a downside to this though – the rug pad will leave marks on your floors. Many floor installation companies know how to deal with this problem, and thanks to the tips listed below, now you do as well.

Use a Solution Like WD-40

The Best Hardwood Floor Cleaners for Spot-Free Surfaces

WD-40 is a lubricant, and is probably the last thing that you’d reach for when you have sticky rug pad residue on your concrete floor. However, it’s actually one of the best things to use. All that you need to do is spray the WD-40 onto the residue and then let it sit for a few minutes.

Run a microfiber towel over the mess to pick up as much of it as you can, and then repeat as needed. In most cases, you won’t have to do this more than two or three times.

Image Source

Be careful to not let the WD-40 sit on the floor for more than a few minutes at a time, since it will seep into the concrete and stain it. If this happens, pour a little laundry detergent over the stain and cover it with sawdust or cat litter. (Yes, this is similar to what you do in order to remove oil and stains from your driveway.)

If you don’t have any WD-40 on hand, you can use any lubricant, or even things like Goo Gone or any other adhesive remover.

Use a Paint Scraper

To Save the Planet, Start Small

Depending on the type of floor that you have, you can also use a paint scraper to remove the rug pad residue. Don’t use this on tile or wood floors, as it can scratch them, but if you do decide to be brave and test this method, be very careful.

Six Reasons Shared Workspaces are Cool for Freelancers

(Most floor installation companies will simply tell you not to use this method at all.)This method works best in conjunction with the WD-40 and lubricant, since it can help with the stubborn bits of residue.

Mix Up a Vinegar Solution

How to Clean Almost Everything With Vinegar

If you have vinyl or tile flooring, then you’ll need to mix up a concoction that consists of ¼ cup of white vinegar, 1 tablespoon of liquid dish detergent, ¼ cup of baking soda, and 2 gallons of hot water.

Interior Design Basics

Soak a rag in the mixture and place it on top of the residue, then let it sink in for about five minutes. Wipe the spot with the rag or soft cloth and then repeat as needed until the residue is gone.

Avoid Getting Rug Pad Marks in the First Place

3 Problems You Avoid With A Virtual Office

Ideally, you won’t have these marks in the first place. They can be avoided fairly easily, just by picking up the rug and its pad every six months in order to clean them and the floor underneath very thoroughly.

The post Cleaning Solutions: Restoring Different Types Of Floors From Rug Pad Marks appeared first on InstantELLA.